Blackstar Amplification
Would you like to react to this message? Create an account in a few clicks or log in to continue.

How do you rebias an HT-40?

2 posters

Go down

How do you rebias an  HT-40? Empty How do you rebias an HT-40?

Post by clay49 Mon Jul 26, 2010 10:40 pm

Ok...I've read that I have to rebias when I put new power tubes in, but how is it done? I've removed the chasis, and found the pots, but where are the contact points for my multimeter? I've biased other amps, but each one is a little different. Anything available on this???

clay49

Posts : 1
Join date : 2010-07-26

Back to top Go down

How do you rebias an  HT-40? Empty Re: How do you rebias an HT-40?

Post by MusashiChan Tue Jul 27, 2010 9:35 am

Blackstar still don't have made the schematics available...do you have a picture of the board ???

But....take this with caution....my amp tech said to me that they don't need to be rebiased, for my Artisan, they seem to be cathode biased...it's the case on the ht 20 :

http://www.guitariste.com/forums/amplification,blackstar-amplification-user-s-club,272095,190.html

It's in french, but it's sure for the ht 20, no reason not to be the same on the ht 40...me with my Artisan, i have no issue, tubes seems to be at a nice level, and no buzz is audible, so i think it's the same too.

MusashiChan
MusashiChan
Admin

Posts : 237
Join date : 2010-06-06
Age : 48
Location : Lyon (FRANCE)

http://musashichan.com/

Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum